Features · Creai Fabricate

Turn an idea into a physical product you can get made

Describe the thing you want to hold in your hand. Creai Fabricate writes the spec, models every part in 3D, checks that a factory can make it, and gives you the drawings and files to print a prototype, ask for quotes and take it to market. AI product design, from your words to files a manufacturer can price.

How it works

  1. Describe it

    Say what it is, who it’s for and roughly how many you want to make. creai.dev picks the materials and process a manufacturer would use at that quantity, and writes down every assumption and open question.

  2. Watch it take shape

    Each part is modelled as real, editable CAD and checked the way a toolmaker would check it. Turn it, slice it open, pull it apart, and ask for changes in plain words; it revises the same design.

  3. Take it to be made

    Download STEP files, drawings and a request-for-quotation package for any manufacturer, print a prototype at home, or ask creai.dev to print one for you or find the factory.

What you get

A spec a factory recognises

Components, material grades, the manufacturing process, tolerances, finishes, compliance notes and a rough cost at each quantity, with its basis stated.

  • ✓Twelve processes, including injection and silicone molding, overmolding, die casting, CNC, sheet metal, extrusion, urethane casting and 3D printing
  • ✓Standard screws, holes and inserts, so assemblies use parts you can buy

3D CAD of every part

Parametric CAD you watch build in the preview, then turn, section and explode. A STEP file for every part and for the assembly, plus the model’s source.

Checked like a toolmaker would

Every part is measured on its real geometry for walls too thin or too thick, missing draft and undercuts, and each finding is pinned to its spot on the model.

  • ✓Say what a part has to hold and a stress check gives its safety factor
  • ✓creai.dev also looks at rendered views of its own design and fixes what the numbers miss

Adjust it without starting over

Change a dimension the model is built from (a wall, a length, a radius) with a slider or a number, press Rebuild, and the model, drawings and checks are redone in seconds.

Drawings and a quote package

A dimensioned 2D drawing for every part and a request-for-quotation package written from the spec: what a contract manufacturer needs to price it.

Prototype it

Open a print-ready build plate in OrcaSlicer in one tap, with an estimate of filament, time and cost, or download it for Bambu Studio, PrusaSlicer or Cura.

  • ✓Or have creai.dev print up to five prototype sets and ship them within the US, priced from that estimate

Packaging, too

A retail box sized from your product’s 3D model, written and laid out for you, with every word, colour and size yours to change. The print file has 3 mm bleed and the die line on its own spot colour.

Or have it made for you

Ask creai.dev to find the factory and the packaging, run samples and manage the order. You see the factory’s quote first; creai.dev’s fee is 10% of the order (minimum $150), charged only if you accept it.

Circuit boards and firmware, as drafts

If your product needs a small custom board, you get a checked connection diagram, a KiCad netlist and a parts list in JLCPCB’s format for an engineer to lay out, and firmware for its microcontroller, compiled to check it builds where it can be.

Inventions, with sources

When a product depends on how something physically works, creai.dev reads current research and patents and lists what the design relies on, with links, so you can see what’s proven and what isn’t.

Engineering records

Drafts of the records a quality system keeps: requirements traceability, design and process FMEAs, a control plan, a verification plan and a design review ready to sign.

  • ✓Release a design as revision A, B, C with a named approver and a change order

Show it off, then launch it

Share a page where anyone can turn your product in 3D and, on a phone, place it in their room at real size. Then use the product shot on its launch page.

Your designs stay yours

Every file is yours to download and take to any manufacturer. Your CAD never reaches another workspace; across products, creai.dev keeps only general design lessons.

Fabricate gives you a factory-ready draft for quotes and samples, not a certified design: a factory engineer still reviews it before tooling is cut, costs and print times are estimates, and circuit boards come as a netlist and parts list, not a finished layout.

Questions

Is it free to try?

Starting a design needs about 600 credits in your workspace, which is more than the 150 a free account comes with. Credit packs start at $10 for 1,000 credits, and the Launch plan includes 1,500 credits a month.

Do I need CAD experience?

No. You describe the product and creai.dev builds the model. If you do use CAD, the STEP files open in any CAD program.

Can I change the design?

Yes. Tell creai.dev what to change and it revises the same design, keeping everything you didn’t ask to change.

Can creai.dev make it for me?

Yes. It can print up to five prototype sets and ship them within the US, or find the factory and packaging and manage the order. For sourcing, you see the factory’s quote before you pay anything; the fee is 10% of the order, $150 minimum.

Who owns the design?

You do. You own what you bring and what creai.dev makes for you, to the extent the law allows, and every file is yours to take to any manufacturer.

Is the design ready for production?

It’s a factory-ready draft for quotes and samples, not a certified design. A factory engineer still reviews it before tooling is cut, and costs and print times are estimates.

Your turn. Say it.

Opens creai.dev with “Design a product that…” waiting in the box. Finish the sentence; nothing is sent until you press go.

Design a product →

Keep reading

Next

Launch → Publish, host and put it on your own domain